Product Introduction

 

Packaging Specifications of Tintable Primer

25kg/barrel (20L cylindrical plastic barrel: height 38cm, upper diameter 30.9cm, lower diameter 29.8cm).

 

 

Precautions During Application

1. Before large-scale application, test-coat 1-2㎡ on the wall to confirm that the color and effect match the standard sample before proceeding.
2. For large-scale applications, perform line divisions and use suspended platforms for construction to avoid pole marks caused by scaffolding.
3. It is recommended that the same batch of paint be applied by the same team of workers on the same wall to ensure consistent surface effects and avoid uneven finishes.
4. Stir the product thoroughly before use. Use rollers and brushes for application. Elastic embossing coating does not require dilution.
5. Application is strictly prohibited when the ambient temperature is below 8°C, the relative humidity exceeds 70% RH, or during rainy, foggy, or windy weather, as this will affect the formation of the coating.
6. During breaks or after application, seal any unused paint tightly to prevent it from drying out in the barrel. Clean tools and clothing promptly; otherwise, dried paint will be difficult to remove.
7. It is recommended to reserve 3-5 barrels of material for future maintenance.

 

Coating Drying Time – (Under Conditions of Above 8°C and Relative Humidity Below 70% RH)

Primer: Drying time is at least 4 hours. Apply latex paint only after the primer is completely dry.

 

 

Storage, Transportation, and Disclaimer

Storage and Transportation

1. Transportation: The product is non-flammable, non-explosive, safe, non-toxic, and harmless. Avoid excessive stacking.
2. Storage: Store in a sealed container in a dry, cool place at a temperature of 5-30°C. Avoid frost and direct sunlight.

 

Disclaimer

If the above instructions are violated, resulting in forced application or improper operation, issues such as peeling, chalking, cracking, efflorescence, fading, and other unforeseen coating defects may occur. In such cases, our company and distributors will not bear responsibility for quality issues or economic losses caused. Refer to the product certificate for the product’s shelf life, quality standards, and dilution ratio.

 

Product delivery