Product Introduction

Color Card Display(Thousand color adjustable)

 

Features of Interior Wall Latex Paint

1. Odorless and environmentally friendly, healthy and fresh.
2. Superior hiding power.
3. Efficient formaldehyde removal.
4. Excellent scrub resistance.
5. Anti-alkaline and mildew-resistant.
6. Waterproof and breathable.
7. Quick drying and easy to apply.
8. Long-lasting bright colors.

 

Applications of Interior Wall Latex Paint

The product is widely used for interior wall coatings in residential homes, office spaces, commercial areas, and public spaces.

 

Packaging Specifications

23kg/barrel (20L cylindrical plastic barrel: height 38cm, upper diameter 30.9cm, lower diameter 29.8cm).

 

 

Supporting Coatings and Application Tools

Supporting Coatings and Usage

Primer: Theoretical consumption is 8-9㎡/kg (one coat). Actual consumption may vary depending on wall roughness or application methods.

Interior Wall Latex Paint: Theoretical consumption is 4-5㎡/kg (two coats). Actual consumption may vary depending on wall roughness or application methods.

Note: We will provide and confirm the necessary coatings for your project based on your desired results.

 

Application Tools

Rollers, brushes, sandpaper, masking tape, protective film, etc. (Tools should be prepared according to project requirements).

 

 

Application of Interior Wall Latex Paint

Wall Inspection and Environmental Requirements Before Application

The wall to be coated should already have a putty layer applied, with a firm, clean surface that is free of cracks, peeling, dust, hollowing, lime bursts, poorly adhered old coatings, and oil stains. The wall moisture content should be less than 5%.

The ambient temperature should be above 8°C, with a relative humidity below 75% RH.

 

Standard Application Steps

1. Roll coat primer (one coat).
2. Roll coat interior wall latex paint (two coats).
3. Allow a curing period of 7 days.

 

Precautions During Application

1. Before large-scale application, test-coat 1-2㎡ on the wall to confirm that the color and effect match the standard sample before proceeding.
2. It is recommended that the same batch of paint be applied by the same team of workers on the same wall to ensure consistent surface effects and avoid uneven finishes.
3. Stir the product thoroughly before use. Use rollers and brushes for application. For white latex paint, dilute with 15%-20% water before use. For light-colored latex paint, dilute with 10%-15% water before use. For dark-colored latex paint, dilution is not recommended.
4. Application is strictly prohibited when the ambient temperature is below 8°C, the relative humidity exceeds 70% RH, or during rainy, foggy, or windy weather, as this will affect the formation of the coating.
5. During breaks or after application, seal any unused paint tightly to prevent it from drying out in the barrel. Clean tools and clothing promptly; otherwise, dried paint will be difficult to remove.
6. It is recommended to reserve 3-5 barrels of material for future maintenance.

 

Coating Drying Time – (Under Conditions of Above 8°C and Relative Humidity Below 70% RH)

Primer: Drying time is at least 4 hours. Apply latex paint only after the primer is completely dry.

Interior Wall Latex Paint: Surface drying time is at least 20 minutes, and complete drying takes 4 hours. The second coat can be applied after the paint is dry.

 

 

Storage, Transportation, and Disclaimer

Storage and Transportation

1. Transportation: The product is non-flammable, non-explosive, safe, non-toxic, and harmless. Avoid excessive stacking.
2. Storage: Store in a sealed container in a dry, cool place at a temperature of 5-30°C. Avoid frost and direct sunlight.

 

Disclaimer

If the above instructions are violated, resulting in forced application or improper operation, issues such as peeling, chalking, cracking, efflorescence, fading, and other unforeseen coating defects may occur. In such cases, our company and distributors will not bear responsibility for quality issues or economic losses caused. Refer to the product certificate for the product’s shelf life, quality standards, and dilution ratio.

 

Product delivery