Product Introduction

Applications of Liquid Wallpaper

The product is widely used for the decoration and protection of interior walls in villas, residences, guesthouses, hotels, museums, art galleries, libraries, concert halls, office buildings, international schools, and commercial plazas.

 

Packaging Specifications

Packaged as a set

 

 

Supporting Coatings and Application Tools

Supporting Coatings

1. Special Artistic Primer: Theoretical consumption is 8-9㎡/kg (one coat). Actual consumption may vary depending on wall roughness or application methods.
2. Liquid Wallpaper: Theoretical consumption is 80㎡/set. Actual consumption may vary depending on wall roughness or application methods.
3. Artistic Printing Coating (optional): The actual consumption depends on the specific printing pattern.

Note: We will provide and confirm the necessary coatings for your project based on your desired results.

 

Application Tools

Wool rollers, fine wool rollers, natural seaweed sponges, masking tape, protective film, printing molds, etc. (Tools should be prepared according to project requirements).

 

 

Application of Liquid Wallpaper

Wall Inspection Before Application

• The wall to be coated should already have a putty layer applied, with a firm, clean surface that is free of cracks, peeling, dust, hollowing, lime bursts, poorly adhered old coatings, and oil stains. The wall moisture content should be less than 5%.
• The ambient temperature should be above 8°C, with a relative humidity below 75% RH.

 

Standard Application Steps

1. Roll-coat one layer of special artistic primer.
2. Use the base color coating from the Liquid Wallpaper set and roll-coat one layer.
3. Use a seaweed sponge to apply the finish coatings from the Liquid Wallpaper set. The finish coatings consists of parts A and B, which should be applied separately in even dabs.
4. Use artistic printing coating and a printing mold to create decorative patterns (optional).
5. Allow a curing period of 7 days.

 

Precautions During Application

1. Before large-scale application, test-coat 1-2㎡ on the wall to confirm that the color and effect match the standard sample before proceeding.
2. It is recommended that the same batch of coating be applied by the same team of workers on the same wall to ensure consistent surface effects and avoid uneven finishes.
3. Stir the product thoroughly before use. This product does not require dilution.
4. Application is strictly prohibited when the ambient temperature is below 8°C, the relative humidity exceeds 70% RH, or during rainy, foggy, or windy weather, as this will affect the formation of the coating.
5. During breaks or after application, seal any unused paint tightly to prevent it from drying out in the container. Clean tools and clothing promptly; otherwise, dried paint will be difficult to remove.
6. It is recommended to reserve 3-5 sets of materials for future maintenance.

 

Coating Drying Time

• Primer: Drying time is at least 4 hours. Apply the next layer only after the primer is completely dry.
• Liquid Wallpaper: Each layer requires at least 4 hours to dry completely before proceeding to the next step.
• Artistic Printing Coating: Drying time is at least 4 hours. Apply the next layer only after the printing coating is completely dry.

 

 

Storage, Transportation, and Disclaimer

Storage and Transportation

1. Transportation: The product is non-flammable, non-explosive, safe, non-toxic, and harmless. Avoid excessive stacking.
2. Storage: Store in a sealed container in a dry, cool place at a temperature of 5-30°C. Avoid frost and direct sunlight.

 

Disclaimer

If the above instructions are violated, resulting in forced application or improper operation, issues such as peeling, chalking, cracking, efflorescence, fading, and other unforeseen coating defects may occur. In such cases, our company and distributors will not bear responsibility for quality issues or economic losses caused. Refer to the product certificate for the product’s shelf life, quality standards, and dilution ratio.

 

Project Cases